Temperature Probes

The fiber optic temperature probes developed and manufactured by FISO have been used for years in various applications, ranging from medical (with temperature probes in FDA approved devices) to process control and high-power transformer. Our fiber optic temperature sensors are installed in various sectors where immunity to MW or RF interferences, accuracy and small size are required.

With different designs and configurations, our products present the following characteristics:

• High-temperature: 300 °C
• Miniature size and very low thermal mass
• Fast response time (<1 millisecond)
• High accuracy (better than 0.3 °C)

  FISO | Pressure

  　

  Pressure transducers

  Fiber optic pressure transducers developed and manufactured by FISO have been used for years in various applications ranging from medical (with pressure transducers in multiple FDA approved devices) to process control and laboratory applications. Our fiber optic pressure sensors are installed in various sectors where miniature size, immunity to MW or RF interferences, accuracy, resolution and stability are required.

  With different designs and configurations, our products present the following characteristics:

  • Miniature size: 550microns down to 125microns OD
  • High accuracy and resolution
  • Excellent frequency response

  　

  　

  	FOP-M260 Extremely small with 260microns O.D. Range: -300mmHg to +300mmHg Accuracy: 3mmHg			FOP-MIV Integrated into multiple FDA approved devices 550 microns O.D. Resolution: 0.3mmHg
  See product datasheet			See product datasheet

  	FOP-F125 Smallest pressure transducer 125 microns O.D. Suitable for high volume manufacturing			FOP-M Range: 0-5psi to 0-1000psi Accuracy: <1% F.S. Multiple models available
  See product datasheet			See product datasheet

  	FOP-C Range: 0-30 to 0-10000psi Accuracy: 0.25% F.S. Robustness and reliability			FOP-MHP Engineering prototype High Pressure: >1000psi
  See product datasheet			See product datasheet

  	FOP-MH Engineering prototype High Temperature: >300°C			FOP-MS Engineering prototype Miniature side-looking
  See product datasheet			See product datasheet

  				FOP-MA Engineering prototype High-sensitivity/Accoustic
  			See product datasheet

  FISO | Strain

  Strain gage

  Fiber optic strain gauges are suitable for various applications ranging from medical devices to research and development of new material and structural health monitoring in civil engineering. These sensors can be used as a load cell when properly installed and calibrated. In addition to their miniature size, our fiber optic strain sensors are immune to EMI, RFI and lightning. They are functional on wide temperature ranges and have extremely low thermal sensitivity and transverse sensitivity.

  　

  With different designs and configurations, our products present the following characteristics:

  • High sensitivity (>0.1% FS)
  • Long-range capability; 4km of cable
  • No interference due to cable bending
  • Absolute measurements in engineering units

  　

  　

  	FOS-N Range: Up to 10,000 microstrain Operating temperature: -40 to +250°C High resolution			SFO-W For welding on metallic structure Range: 2000 to 4000 microstrain Operating temperature: -40°C to +85°C
  See product datasheet			See product datasheet

  	EFO Embedded into concrete Range: 2000 to 6000 microstrain Operating range: -40°C to +85°C
  See product datasheet

  FISO | Displacement

  Displacement

  Fiber optic displacement and positioning sensors are designed and manufactured for various applications such as monitoring of electrically energized components in high-power transformers, structural monitoring and actuators. Our fiber optic linear position and displacement transducers are immune to EMI and RFI, offer built-in safety for hazardous environments and provide high precision and high temperature operating range. Their high accuracy and resolution as well as the high-speed measurement capability reached when joined to the right signal conditioner bring new fields of application to engineers and scientists

  　

  With different designs and configurations, our products present the following characteristics:

  • Full-functionality, even over 100 °C
  • Resolution as good as 0.002mm
  • Standard product up to 20mm linear stroke

  　

  	FOD Range: 20mm linear stroke Resolution 0.002mm Costum material and lenght available
  See product datasheet

  FISO | Refractive Index

  Refractive index

  Fiber optic refractive index sensors developed and manufactured by FISO are suitable for various applications such as quality control, research & development and in-line process control. When used as in-line refractometers, they allow continuous measurement of key characteristic of fluidic mixtures.

  　

  Widely used in cooling system industry to monitor the quality of oil in the carter of compressor to assess the reliability of compressors, they also find their place in the petrochemical industry.

  　

  With different designs and configurations, our products present the following characteristics:

  • Broad range of reading: 1.0 to 1.7 RI
  • High resolution: 0.0001
  • Design adapted to in-situ and in-line measurement

  　

  　

  	FRI Range: 1.0000 to 1.7000 Resolution: 0.0001 Compatible with organic solvent			FTI-10 Range: 1.0000 to 1.7000 Resolution: 0.0001 Compatible with organic solvent
  See product datasheet			See product datasheet

  	UMI Multi-parameters signal conditioner Temperature, pressure, strain, displacement, RI Display and key pad
  See product datasheet

New product

Nortech EasyGrid LT  Up to 8 Fiber Optic Channels Reliable Field Proven technology. Robust, Accurate & Cost Effective Winding Hot Spot Solution. Modbus, Modbus TCP-IP, DNP 3.0, IEC 61850 & IEC 61870-5-104.

Datasheet

Signal conditioners

FPI-HR	FPI-HS

FPI-HS/HE	FPI-HERO

FTI-10	TMI

UMI	DMI

Nortech EasyGrid