| Weldable Strain Gages - Axial |
Axial configured strain gages measure strain in
one principal direction: along the long axis of the
shim. They can be oriented in either the
longitudinal or circumferential direction on the
component being tested, and the shims can be
pre-curved to fit surfaces with small radius
curvatures.
Our waterproof gages are specifically designed to
evaluate and monitor live-load stresses for
railroad, bridge, and other structural applications
and are 100% full water immersion tested.
The precision foil gage is bonded to a stainless
steel shim, pre-wired and protected with a molded
water-proofing material. The stainless steel shim
permits easy field installation with any
conventional capacitive discharge spot welder.
Instrumentation cable and wiring options can be
customized to your specifications. Custom gage sizes
and resistance are also available. Please see the
table below for options.
Temperature Range: -50°F — 180°F (-45.5°C —
82°C)
HBW-35-125-6-VR |
|
Standard Part Number |
Strain Type |
Gage Resistance (nominal) |
Gage Factor (nominal) |
Gage Length |
Lead Wire |
Shim Length |
Shim Width |
Datasheet (pdf) |
| HBW-35-125-6-VR |
Static |
350 Ohms |
2.0 |
.125" |
Vinyl |
0.85" |
0.4" |
80-800 |
| HBW-35-125-6-GP-TR(SS) |
Static |
350 Ohms |
2.0 |
.125" |
Shielded Vinyl |
0.85" |
0.4" |
80-801 |
| HBW-35-125-6-GP-NT |
Static |
350 Ohms |
2.0 |
.125" |
Shielded Vinyl |
1.5" |
0.6" |
80-802 |
|
HBW-12-125-6-GP-NT |
Static |
120 Ohms |
2.0 |
.125" |
Shielded Vinyl |
1.5" |
0.6" |
80-803 |
|
HBW-35-250-6-VR |
Static |
350 Ohms |
2.0 |
.250" |
Vinyl |
1.0" |
0.5" |
80-804 |
| HBW-35-125-6-GP-DS |
Static |
350 Ohms |
4.1 (composite) |
.125" |
Shielded Vinyl |
1.0" |
0.5" |
80-805 |
| HBWW-35-125-6-VR |
Static |
350 Ohms |
2.0 |
.125" |
Vinyl |
1.0" |
0.5" |
80-816 |
| HBWF-35-125-6-GP-NT |
Static |
350 Ohms |
4.0 |
.125" |
Shielded Vinyl |
1.5" |
0.6" |
80-808 |
|
HBWF-35-125-6-GP-TR(SS) |
Static |
350 Ohms |
4.0 |
.125" |
Shielded Vinyl |
1.0" |
0.5" |
80-809 |
|
HBW-35-1000-6-HP-TR(SS) |
Static |
350 Ohms |
2.0 |
1.0" |
Heavy Duty Shielded
Vinyl |
2.0" |
0.6" |
80-828 |
|
HBW-35-2000-6-GP-NT |
Static |
350 Ohms |
2.0 |
1.0" |
Shielded Vinyl |
2.0" |
0.6" |
80-829 |
|
HBW-35-125-6-GP-HB-TR(SS) |
Static |
350 Ohms |
2.0 |
.125" |
Shielded Vinyl |
1.0" |
0.5" |
80-832 |
|
HBW-35-125-6-GP-HB-NT |
Static |
350 Ohms |
2.0 |
.125" |
Shielded Vinyl |
1.5" |
0.6" |
80-833 |
|
HBWF-35-125-6-GP-DS/DR |
Static |
350 Ohms |
8.0 |
.125" |
Shielded Vinyl |
1.0" |
.50" |
80-835 |
|
STANDARD GAGE CONFIGURATIONS CAN
BE CUSTOMIZED FOR INDIVIDUAL APPLICATIONS
CHOOSE OPTIONS FROM THE TABLE BELOW FOR
WATERPROOF WELDABLE GAGES
|
|
GAGE RESISTANCE |
CUSTOM WIRING OPTIONS |
| 12 |
120 Ohms |
SS |
Stainless
steel hypo-tube stress relief between sensor
and cable transition |
| 35 |
350 Ohms |
TR |
Teflon ribbon stress
relief between sensor and cable transition |
| 100 |
1000 Ohms |
NL |
No leads |
| |
|
NT |
Sensors with cable
integral to sensor shim (no transition) |
|
GAGE LENGTH |
FB |
Full bridge |
| 125 |
1/8" active grid |
HB |
Half bridge |
| 250 |
1/4" active grid |
DR |
Dual sensor shims,
teflon ribbon stress relief |
| 1000 |
1" active grid |
DS |
Dual sensor shims,
stainless steel stress relief |
| 2000 |
2" active grid |
FR |
Full bridge: 4 active
elements on single shim, teflon ribbon
stress relief |
| |
|
FS |
Full bridge: 4 active
elements on single shim, stainless steel
stress relief |
|
TEMP. COMPENSATION |
AMP |
Amplified full bridge, gain of X 100
standard
(wiring datasheet) |
| 6 |
6 ppm/°F |
NW |
No waterproofing
encapsulation |
| 9 |
9 ppm/°F |
|
|
PRE-CURVED SHIMS
(datasheet) |
INSTRUMENTATION CABLE |
| Hoop
(Circumferential) |
GP |
General purpose 3 or 4
conductor, shielded vinyl jacket (#22 AWG) |
| Axial
(Longitudinal) |
HP |
4 conductor, heavy
duty shielded vinyl jacket (#22 AWG) |
| |
|
VR |
3 or 4 conductor,
vinyl ribbon (#24 or #30 AWG) |
| |
|
TR |
3 or 4 conductor,
teflon ribbon (#30 AWG) |
| |
|
UP |
4 conductor,
polyurethane shielded jacket (#22 AWG) |
| |
|
EP |
4 conductor silicone
shielded jacket, elevated temp. (#22 AWG) |
|
| Waterproof Strain Gages - Chevron |
HPI's Chevron strain gages are designed with two
active elements oriented at right angles (90°) to
each other, bonded to a single shim. Most popular
for the ease and accuracy of Poisson’s Ratio
measurements. (A material loaded in one direction
will undergo strains perpendicular to the direction
of the load as well as parallel to it. The ratio of
the transverse strain to the longitudinal strain is
called Poisson’s Ratio.)
Our waterproof gages are specifically designed to
evaluate and monitor live-load stresses
for railroad, bridge, and other structural
applications and are 100% full water immersion
tested.
The precision foil gage is bonded to a stainless
steel shim, pre-wired and protected with a molded
water-proofing material. The stainless steel shim
permits easy field installation with any
conventional capacitive discharge spot welder.
Instrumentation cable and wiring options can be
customized to your specifications. Custom gage sizes
and resistance are also available. Please see the
table below for options.
Temperature Range: -50°F — 180°F
(-45.5°C — 82°C)
HBWC-12-125-6-VR-HB |
|
Standard Part Number |
Strain Type |
Gage Resistance (nominal) |
Gage Factor (nominal) |
Gage Length |
Lead Wire |
Shim Length |
Shim Width |
Datasheet (pdf) |
|
HBWC-12-125-6-VR-HB |
Static |
120 Ohms |
2.0 |
.125" |
Vinyl |
1.06" |
1.06" |
80-807 |
|
HBWC-12-125-6-GP-TR-HB |
Static |
120 Ohms |
2.0 |
.125" |
Shielded Vinyl |
1.06" |
1.06" |
80-806 |
|
HBWC-35-125-6-GP-FR(FS) |
Static |
350 Ohms |
8.0 (composite) |
.125" |
Shielded Vinyl |
1.06" |
1.06" |
80-818 |
|
HBWC-12-125-6-GP-TR-QB |
Static |
120 Ohms |
2.0 |
.125" |
Shielded Vinyl |
1.06" |
1.06" |
80-819 |
|
HBWC-35-125-6-VR-HB |
Static |
350 Ohms |
2.0 |
.125" |
Vinyl |
1.06" |
1.06" |
80-843 |
|
HBWC-35-125-6-VR-QB |
Static |
350 Ohms |
2.0 |
.125" |
Vinyl |
1.06" |
1.06" |
80-844 |
|
HBWC-35-125-6-GP-TR(SS)-HB |
Static |
350 Ohms |
2.0 |
.125" |
Shielded Vinyl |
1.06" |
1.06" |
80-845 |
|
HBWC-35-125-6-GP-TR(SS)-QB |
Static |
350 Ohms |
2.0 |
.125" |
Shielded Vinyl |
1.06" |
1.06" |
80-846 |
|
STANDARD GAGE
CONFIGURATIONS CAN BE CUSTOMIZED FOR
INDIVIDUAL APPLICATIONS CHOOSE OPTIONS FROM
THE TABLE BELOW FOR WATERPROOF STRAIN GAGES
|
|
GAGE RESISTANCE |
CUSTOM WIRING OPTIONS |
| 12 |
120 Ohms |
SS |
Stainless
steel hypo-tube stress relief between sensor
and cable transition |
| 35 |
350 Ohms |
TR |
Teflon ribbon stress
relief between sensor and cable transition |
| 100 |
1000 Ohms |
NL |
No leads |
| |
|
NT |
Sensors with cable
integral to sensor shim (no transition) |
|
GAGE LENGTH |
FB |
Full bridge |
| 125 |
1/8" active grid |
HB |
Half bridge |
| 250 |
1/4" active grid |
DR |
Dual sensor shims,
teflon ribbon stress relief |
| 1000 |
1" active grid |
DS |
Dual sensor shims,
stainless steel stress relief |
| 2000 |
2" active grid |
FR |
Full bridge: 4 active
elements on single shim, teflon ribbon
stress relief |
| |
|
FS |
Full bridge: 4 active
elements on single shim, stainless steel
stress relief |
|
TEMP. COMPENSATION |
AMP |
Amplified full bridge, gain of X 100
standard
(wiring datasheet) |
| 6 |
6 ppm/°F |
NW |
No waterproofing
encapsulation |
| 9 |
9 ppm/°F |
|
|
PRE-CURVED SHIMS |
INSTRUMENTATION CABLE |
| Hoop
(Circumferential) |
GP |
General purpose 3 or 4
conductor, shielded vinyl jacket (#22 AWG) |
| Axial
(Longitudinal) |
HP |
4 conductor, heavy
duty shielded vinyl jacket (#22 AWG) |
| |
|
VR |
3 or 4 conductor,
vinyl ribbon (#24 or #30 AWG) |
| |
|
TR |
3 or 4 conductor,
teflon ribbon (#30 AWG) |
| |
|
UP |
4 conductor,
polyurethane shielded jacket (#22 AWG) |
| |
|
EP |
4 conductor silicone
shielded jacket, elevated temp. (#22 AWG) |
|
| Waterproof Strain Gages - Shear/Torque |
HPI Shear configured strain gages are used to
measure the angular distortion that results when a
component is subjected to torque or twisting. The
shear strain gage design is more compact than the
Chevron gage, facilitaing its use where installation
contraints are a concern.
Our waterproof gages are specifically designed to
evaluate and monitor live-load stresses for
railroad, bridge, and other structural applications
and are 100% full water immersion tested.
The precision foil gage is bonded to a stainless
steel shim, pre-wired and protected with a molded
water-proofing material. The stainless steel shim
permits easy field installation with any
conventional capacitive discharge spot welder.
Instrumentation cable and wiring options can be
customized to your specifications. Custom gage sizes
and resistance are also available. Please see the
table below for options.
Temperature Range: -50°F — 180°F (-45.5°C —
82°C)
HBWS-35-125-6-VR |
|
Standard Part Number |
Strain Type |
Gage Resistance (nominal) |
Gage Factor (nominal) |
Gage Length |
Lead Wire |
Shim Length |
Shim Width |
Datasheet (pdf) |
|
HBWS-35-125-6-VR |
Static |
350 Ohms |
2.0 |
.125" |
Vinyl |
1.0" |
0.5" |
80-811 |
|
HBWS-35-125-6-GP-TR(SS) |
Static |
350 Ohms |
2.0 |
.125" |
Shielded Vinyl |
1.0" |
0.5" |
80-812 |
|
HBWS-35-125-6-GP-NT |
Static |
350 Ohms |
2.0 |
.125" |
Shielded Vinyl |
1.5" |
0.6" |
80-813 |
|
HBWS-35-125-6-2TR(5)-FB-TMP36 |
Static |
350 Ohms |
8.0 |
.125" |
Teflon/5 Cond. |
1.5" |
0.6" |
80-825 |
|
HBWS-35-125-6-0.5VR-FB |
Static |
350 Ohms |
2.0 |
.125" |
Shielded Vinyl |
1.5" |
0.6" |
80-838 |
|
STANDARD GAGE
CONFIGURATIONS CAN BE CUSTOMIZED FOR
INDIVIDUAL APPLICATIONS
CHOOSE OPTIONS FROM THE TABLE BELOW FOR
WATERPROOF STRAIN GAGES
|
|
GAGE RESISTANCE |
CUSTOM WIRING OPTIONS |
| 12 |
120 Ohms |
SS |
Stainless
steel hypo-tube stress relief between sensor
and cable transition |
| 35 |
350 Ohms |
TR |
Teflon ribbon stress
relief between sensor and cable transition |
| 100 |
1000 Ohms |
NL |
No leads |
| |
|
NT |
Sensors with cable
integral to sensor shim (no transition) |
|
GAGE LENGTH |
FB |
Full bridge |
| 125 |
1/8" active grid |
HB |
Half bridge |
| 250 |
1/4" active grid |
DR |
Dual sensor shims,
teflon ribbon stress relief |
| 1000 |
1" active grid |
DS |
Dual sensor shims,
stainless steel stress relief |
| 2000 |
2" active grid |
FR |
Full bridge: 4 active
elements on single shim, teflon ribbon
stress relief |
| |
|
FS |
Full bridge: 4 active
elements on single shim, stainless steel
stress relief |
|
TEMP. COMPENSATION |
AMP |
Amplified full bridge, gain of X 100
standard
(wiring datasheet) |
| 6 |
6 ppm/°F |
NW |
No waterproofing
encapsulation |
| 9 |
9 ppm/°F |
|
|
PRE-CURVED SHIMS |
INSTRUMENTATION CABLE |
| Hoop
(Circumferential) |
GP |
General purpose 3 or 4
conductor, shielded vinyl jacket (#22 AWG) |
| Axial
(Longitudinal) |
HP |
4 conductor, heavy
duty shielded vinyl jacket (#22 AWG) |
| |
|
VR |
3 or 4 conductor,
vinyl ribbon (#24 or #30 AWG) |
| |
|
TR |
3 or 4 conductor,
teflon ribbon (#30 AWG) |
| |
|
UP |
4 conductor,
polyurethane shielded jacket (#22 AWG) |
| |
|
EP |
4 conductor silicone
shielded jacket, elevated temp. (#22 AWG) |
|
| Waterproof Strain Gages - Rosette |
| HPI waterproof rosette strain gages are designed
with three active elements generally configured at
45° angles, but can be designed to customer
specifications. In this configuration, three
linearly independent strain measures are used to
determine the three independent components of plane
strain.
Our waterproof gages are specifically designed to
evaluate and monitor live-load stresses for
railroad, bridge, and other structural applications
and are 100% full water immersion tested.
The precision foil gage is bonded to a stainless
steel shim, pre-wired and protected with a molded
water-proofing material. The stainless steel shim
permits easy field installation with any
conventional capacitive discharge spot welder.
Instrumentation cable and wiring options can be
customized to your specifications. Custom gage sizes
and resistance are also available. Please see the
table below for options.
Temperature Range: -50°F — 180°F
(-45.5°C — 82°C)
HBWR-35-125-6-VR |
|
Standard Part Number |
Strain Type |
Gage Resistance (nominal) |
Gage Factor (nominal) |
Gage Length |
Lead Wire |
Shim Length |
Shim Width |
Datasheet (pdf) |
|
HBWR-35-125-6-UP-9 WIRE |
Static |
350 Ohms |
2.0 |
.125" |
Shielded Polyurethane |
1.06" |
1.06" |
80-810 |
|
HBWR-35-125-6-GP-TR(SS) |
Static |
350 Ohms |
2.0 |
.125" |
Shielded Vinyl |
1.06" |
1.06" |
80-823 |
|
HBWR-35-125-6-VR |
Static |
350 Ohms |
2.0 |
.125" |
Vinyl |
1.06" |
1.06" |
80-824 |
|
HBWR-35-125-6-UP-HB-TR(SS) |
Static |
350 Ohms |
2.0 |
.125" |
Shielded Polyurethane |
1.06" |
1.06" |
80-836 |
|
STANDARD GAGE
CONFIGURATIONS CAN BE CUSTOMIZED FOR
INDIVIDUAL APPLICATION NEEDS
CHOOSE OPTIONS FROM THE TABLE BELOW FOR
WATERPROOF STRAIN GAGES
|
|
GAGE RESISTANCE |
CUSTOM WIRING OPTIONS |
| 12 |
120 Ohms |
SS |
Stainless
steel hypo-tube stress relief between sensor
and cable transition |
| 35 |
350 Ohms |
TR |
Teflon ribbon stress
relief between sensor and cable transition |
| 100 |
1000 Ohms |
NL |
No leads |
| |
|
NT |
Sensors with cable
integral to sensor shim (no transition) |
|
GAGE LENGTH |
FB |
Full bridge |
| 125 |
1/8" active grid |
HB |
Half bridge |
| 250 |
1/4" active grid |
DR |
Dual sensor shims,
teflon ribbon stress relief |
| 1000 |
1" active grid |
DS |
Dual sensor shims,
stainless steel stress relief |
| 2000 |
2" active grid |
FR |
Full bridge: 4 active
elements on single shim, teflon ribbon
stress relief |
| |
|
FS |
Full bridge: 4 active
elements on single shim, stainless steel
stress relief |
|
TEMP. COMPENSATION |
AMP |
Amplified full bridge, gain of X 100
standard
(wiring datasheet) |
| 6 |
6 ppm/°F |
NW |
No waterproofing
encapsulation |
| 9 |
9 ppm/°F |
|
|
PRE-CURVED SHIMS |
INSTRUMENTATION CABLE |
| Hoop
(Circumferential) |
GP |
General purpose 3 or 4
conductor, shielded vinyl jacket (#22 AWG) |
| Axial
(Longitudinal) |
HP |
4 conductor, heavy
duty shielded vinyl jacket (#22 AWG) |
| |
|
VR |
3 or 4 conductor,
vinyl ribbon (#24 or #30 AWG) |
| |
|
TR |
3 or 4 conductor,
teflon ribbon (#30 AWG) |
| |
|
UP |
4 conductor,
polyurethane shielded jacket (#22 AWG) |
| |
|
EP |
4 conductor silicone
shielded jacket, elevated temp. (#22 AWG) |
|
| |
| |
传感器/变送器/仪表按厂商品牌选用指南
应变片
