|
N
E
W |
|
The Lasair® III particle counter is ISO 21501 compliant
through the use of an on-board PHA. Its large IR touch
screen with simplified user interface makes the new standard
for particle counters. |
Model
|
First Channel
|
Flow Rate
|
|
|
The Lasair II 110 particle counter has a full set of
features, unequalled accuracy, reduced
operating costs, and a 3 year laser warranty. |
Model
|
First Channel
|
Flow Rate
|
|
|
This handheld particle counter provides a low
cost alternative for spot monitoring. |
Model
|
First Channel
|
Flow Rate
|
Particle Counting Sensors
|
|
Easy and cost-effective particle counter to
simultaneously monitor particles from multiple locations. |
Model
- 301/OPC
- 501/OPC
- 510/XR/OPC
|
First Channel
|
Flow Rate
|
|
|
Easy and cost-effective particle counter to
simultaneously monitor particles from multiple locations. |
Model
|
First Channel
- 0.2 µm
- 0.3 µm
- 0.3 µm
- 0.5 µm
- 0.5 µm
|
Flow Rate
- 0.1 CFM
- 0.1 CFM
- 1.0 CFM
- 0.1 CFM
- 1.0 CFM
|
|
|
This particle counter is simple to install with
unparalleled performance. A chemically resistant,
easy-to-disinfect stainless steel box. |
Model
|
First Channel
|
Flow Rate
|
|
|
The IsoAir 310P Aerosol Particle Sensor makes aerosol
monitoring easy and cost-effective. It has unparalleled
performance in a rugged, chemical-resistant, and
easy-to-disinfect 316L stainless steel box. |
Model
|
First Channel
|
Flow Rate
|
|
|
A particle counter that provides quality and value as
well as a three year warranty. |
Model
|
First Channel
|
Flow Rate
|
|
|
A rugged particle counter that comes in a chemically
resistant, easy to disinfect, stainless steel box with a
quiet, long-lived
internal pump. |
Model
|
First Channel
|
Sample Volume
|
Pharmaceutical Particle Counters
|
|
The BioLaz Real-Time Microbial Monitor provides real-time
detection of biological organisms in controlled environments
used for the manufacture of sterile products. The sensor can
be connected directly to Pharmaceutical Net, FacilitySight®,
or your own software, and is designed to operate unattended
for continuous operation. The BioLaz has been independently
tested to meet the rigorous requirements of USP <1223>
Validation of Alternative Microbiological Methods and of EP
5.1.6 Alternative Methods for Control of Microbiological
Quality, for the Pharmaceutical market. |
|
|
This particle counter is simple to install with
unparalleled performance. A chemically resistant,
easy-to-disinfect stainless steel box. |
Model
|
First Channel
|
Flow Rate
|
|
|
A rugged particle counter that comes in a chemically
resistant, easy to disinfect, stainless steel box with a
quiet, long-lived
internal pump. |
Model
|
First Channel
|
Sample Volume
|
Particle Counting Accessories
|
|
The HHIPA is a handheld sampling probe that alerts
operators to particles as they are detected in real-time.
The HHIPA is the perfect complement to all Lasair® II and
Lasair III products. |
|
|
Ideal for trend analysis and
cleanroom verification when continuous particle
monitoring is not needed. |
|
|
The High Pressure Diffuser reduces the pressure of dry,
inert, non-toxic, non-flammable gases, such as Clean Dry Air
(CDA), Argon and Nitrogen to a level acceptable to particle
counters designed to operate at atmospheric pressure. |
Particle Counting Information
|
|
Click here for various application and technical papers
to support air particle counting. Learn how to choose a
particle counter for your application and how the particle
counter data can be used to maintain the cleanliness of your
facility. |
|
|
Provides a comprehensive view of the environmental and
process monitoring conditions of a cleanroom facility.
Collect, display, analyze, store, and report data from
particle counters. |
|
|
The PME Driver from Particle Measuring Systems provides
the connection between Ethernet-based instruments and SCADA
systems. The PME Driver can connect to multiple Particle
Measuring Systems instruments simultaneously, allowing for
instrument configuration and sample data collection. |
|
|
Facility monitoring software that helps you meet your
cGMP requirements, providing simplified validation and
compliance to 21 CFR Part 11. Helps you to analyze data from
your particle counters. |
|
|
Testing of injectable product to meet USP 788, EP, and JP
standards |
Sensitivity
|
Sample Volume
|
Zero Count
|
Particle Counters for DI Water
|
|
This particle counter has a large sample volume, low zero
count, and high counting efficiency |
Sensitivity
|
Sample Volume
|
Zero Count
|
N
E
W |
|
This particle counter uses NanoVision Technology® to
provide detection of ultra small particles with excellent
size resolution. |
Sensitivity
|
Sample Volume
|
Zero Count
|
|
|
This liquid particle counter provides continuous
real-time particle monitoring |
Sensitivity
|
Sample Volume
- 0.25 mL/min.
- 0.6 mL/min.
- 0.1 mL/min.
|
Zero Count
- < 1000 cts/L
- < 2000 cts/L
- < 1000 cts/L
|
|
|
A volumetric particle counter using patented "Inviscid
Jet" technology for DI water and chemical particle counting
applications. |
Sensitivity
|
Sample Volume
|
Zero Count
|
Particle Counters for Inline Chemicals
N
E
W |
|
This particle counter uses NanoVision Technology® to
provide detection of ultra small particles with excellent
size resolution. |
Sensitivity
|
Sample Volume
|
Zero Count
|
N
E
W |
|
This particle counter provides measurements
for solvents, chemicals, and DI water |
Sensitivity
|
Sample Volume
|
Zero Count
|
|
|
A particle counter that provides precision analysis for
most process chemicals up to 150°C. |
Sensitivity
- 0.2 µm
- 0.3 µm
- 0.5 µm
- 1.5 µm
- 2.0 µm
|
Sample Volume
- 50 mL/min
- 80 mL/min
- 80 mL/min
- 20 mL/min
- 70 mL/min
|
Zero Count
- < 25 cts/L
- < 15 cts/L
- < 15 cts/L
- < 50 cts/L
- < 50 cts/L
|
|
|
A particle counter that provides continuous,
real-time monitoring of particle levels in
Class I, Div II environments. |
Sensitivity
|
Sample Volume
|
Zero Count
|
|
|
A volumetric particle counter using patented "Inviscid
Jet" technology for DI water and chemical particle counting
applications. |
Sensitivity
|
Sample Volume
|
Zero Count
|
Particle Counters for Batch Sampling
|
|
This particle counter monitors most liquid chemicals up
to 150°C. Continuous or mobile monitoring. |
Sensitivity
|
Sample Volume
- 50 mL/min
- 80 mL/min
- 80 mL/min
|
Zero Count
- < 1 cts/mL
- < 1 cts/mL
- < 1 cts/mL
|
|
|
A bubble compression particle counter that monitors
liquid chemicals up to 90° C. Continuous or mobile
monitoring. |
Sensitivity
|
Sample Volume
|
Zero Count
|
Particle Counters for Syringe Sampling
|
|
The SLS Syringe Sampling System is ideal for applications
where precise, small-volume sampling is needed. |
Sensitivity
|
Sample Volume
|
Zero Count
|
|
|
Includes a syringe sampler, a particle counter, and
software. |
Sensitivity
- 0.2 µm
- 0.3 µm
- 0.5 µm
- 2.0 µm
|
Sample Volume
- 20 mL/min.
- 20 mL/min.
- 20 mL/min.
- 20 mL/min.
|
Zero Count
- < 50 cts/L
- < 50 cts/L
- < 50 cts/L
- < 50 cts/L
|
Parts Cleanliness Testing
|
|
Includes a syringe sampler, a particle counter, and
software. |
Sensitivity
- 0.2 µm
- 0.3 µm
- 0.5 µm
- 2.0 µm
|
Sample Volume
- 20 mL/min.
- 20 mL/min.
- 20 mL/min.
- 20 mL/min.
|
Zero Count
- < 50 cts/L
- < 50 cts/L
- < 50 cts/L
- < 50 cts/L
|
|
|
Surfex® is a completely integrated testing station
designed to measure particle levels on any type of part.
Surfex uniquely combines ultrasonic extraction, particle
measurement, high-purity fluidics, and automated software
control to reduce testing time and therefore reduce the cost
of parts testing. High throughput provides the ability to
increase the number of tests performed, and therefore
increases the confidence that out-of-spec parts are
identified before they adversely affect final product
quality or safety. |
Particle Counting Software
|
|
Provides a comprehensive view of the environmental and
process monitoring conditions of a facility. Collect,
display, analyze, store, and report data from particle
counters. |
|
|
Provides a comprehensive view of batch-based liquid
particle counter information with histogram, time plot, and
tabular data. |
Liquid Particle Monitoring Information
|
|
Click here for applicaton and technical papers related to
liquid particle counting. Learn how to choose a particle
counter for your application and understand the data from
your particle counter. |
|
|
A means to benchmark different liquid particle counters
for obtaining optimal statistical data when monitoring
ultraclean liquids. |
|
|
This updated and simplied particle calculator provides a
means to benchmark different liquid particle counters for
obtaining optimal statistical data when monitoring
ultraclean liquids. |
|
|
Monitors contaminants in process gases at line pressure.
Includes the probe and a data system which collects and
reports data. |
|
|
Samples inert pressurized gases at their line pressures.
This system outputs data to an external printer or computer. |
|
|
Click here for free downloads of relevant application
notes and technical papers. |
|